    PRE-21260 END USER LICENSE AGREEMENT FOR ARM DEVELOPMENT TOOLS V12.6

This end user license agreement (“License”) is a legal agreement between you (a
single individual), or the company or organisation (a single legal entity) that
you represent and have the legal authority to bind, and Arm relating to use of
the Arm Tools. Arm is only willing to license the Arm Tools on condition that
you accept all of the terms of this License. By clicking “I Agree” or by
installing or otherwise using the Arm Tools and/or any Update thereto (as
permitted by this License) you indicate that you agree to be bound by all of the
terms and conditions of this License. If you do not agree to the terms of this
License, Arm will NOT license the Arm Tools to you, you may not install or use
the Arm Tools (as applicable) or any part thereof, and you shall promptly cease
use of (and, if requested by Arm, return to Arm or to your supplier (if not
Arm)) the Arm Tools and ask for a refund of the license fee paid (if any).

NOTE – YOUR ATTENTION IS DRAWN TO THE FOLLOWING:

(A)	The terms and conditions set out in this License shall apply to the supply
by Arm of Arm Tools for both commercial and non-commercial use. If you are in
receipt of a Non-Commercial Use License for the Arm Tools (each capitalised term
as defined below), or the Arm Tools or any component thereof are identified or
classified as such, or you are receiving a license for the Arm Tools free of
charge, then notwithstanding any of the other terms and conditions of this
License, your use of the Arm Tools shall be limited by the restrictions of use
set out in clause 3 of this License.

(B)	PLEASE NOTE any terms and conditions of use set out in the order
documentation provided to you by Arm and the Software Information File(s) (as
defined below) applicable to the Arm Tools provided to you with (or included
within) either (i) the Arm Tools, and/or (ii) any Updates to the Arm Tools,
which limit, extend or otherwise vary the permitted uses and restrictions
applicable to the Arm Tools (“Special Conditions”). The Special Conditions form
part of and are incorporated into this License. In the event of any conflict or
inconsistency between the provisions set out in the main body of this License
and any of the Special Conditions, the provisions set out in the Special
Conditions shall prevail (in the order in which they are listed in this
paragraph).

(C)	This License (and any documents incorporated by reference herein) is the
sole and exclusive agreement between you and Arm for the Arm Tools, and (except
as agreed in writing to the contrary) no other document, including (but not
limited to) your purchase order or any other document supplied by you, will form
part of this License.

1. DEFINITIONS
For the purposes of this License the following words and expressions shall have
the following meanings:
“Ancillary Hardware” means physical products that (i) are specifically designed
to interoperate with Arm-based systems; (ii) do not incorporate, implement,
embody, or otherwise make use of any Arm cores, Arm RTL, or other Arm
intellectual property; (iii) are not Arm Compliant Products; and (iv) are owned
or licensed by you, or manufactured or developed by you or on your behalf.
"Archive License” means a perpetual license to an Arm Tool which is provided
without any entitlement to support and maintenance and is identified as
‘ARCHIVE’ in the order documentation provided to you by Arm.
“Arm” means Arm Limited whose registered office is situated at 110 Fulbourn
Road, Cambridge CB1 9NJ, England and/or any member of Arm’s group of companies.
“Arm Compliant Product” means a physical integrated circuit that incorporates
either or both Arm technology and an implementation of any version of an Arm
architecture.
“Arm Documentation” means any printed, electronic or online documentation owned
or licensed by Arm that relates to the Arm Software.
“Arm Scripts” means software artifacts, typically in human-readable form, that
are designed to be interpreted or executed by a runtime environment rather than
compiled into object code, and any and all derivatives of such software
artifacts. Scripts do not include source code, libraries, firmware, device
drivers, or other software primarily intended to be compiled and distributed as
part of a software product.
“Arm Software” means any software, firmware and data owned or licensed by Arm.
“Arm Tools” means the Arm Software, Arm Scripts and/or Arm Documentation
(including any Updates to the Arm Software, Arm Scripts and/or Arm
Documentation) licensed to you by Arm under this License.
“Arm Tools Performance Data” means any results, benchmarking data or other
information relating to or connected with your use or testing of Arm Tools which
is indicative of their performance, efficacy, reliability or quality.
“Fees” means any fee(s) payable by you for the provision by Arm to you of the
Arm Tools and associated support and maintenance services, and any other fees
payable by you in accordance with this License that are agreed by the parties
from time to time.
“License Key” means an electronic license key issued to you by Arm which enables
you to use and run one or more Licensed Seat of an Arm Tool or a component
thereof in accordance with the terms of this License.
“Licensed Seats” means any and all Seats of the Arm Tools (including, if
applicable, Updates) that you are licensed to run and use concurrently under the
terms of this License, in the types and quantities specified (if applicable) in
the order documentation provided to you by Arm, as well as any additional or
replacement Seats of the Arm Tools that Arm provides to you from time to time
during the License Term (for the purposes of this definition, “Seat” meaning a
written or electronic authorisation to run a software component subject to the
terms and restrictions specified in that authorisation).
“License Term” means the term set out in the order documentation provided to you
by Arm during which you shall be entitled to access and use the Arm Tools.
“Modified Code” is as defined in clause 2.2(c).
“Multi-entity License” means a license identified as a ‘multi-entity’ license on
the order documentation provided to you by Arm.
“Non-Commercial Use License” means an evaluation, preview, beta, pre-release,
pilot, academic, educational or community use only license.
     “Permitted Users” is as defined in clause 3.4.
“Products” means Software, Ancillary Hardware and, subject to Clause 2.2 (b),
Arm Compliant Products and Software Models.
“Redistributables” means the example code, library files, configuration files,
header files, Arm Scripts and any other Arm Tools or components thereof owned by
Arm (or licensed by Arm and provided to you under Arm’s terms and conditions)
which you are permitted to include within, or make available with, software
Products OR, in the case of Arm Scripts and Modified Code only, redistribute,
sub-license or make available to third parties, the details of which (if and as
applicable) are set out in a file or folder (the “Redistributables File”)
typically named ‘redistributables’ located within the ‘license_terms’ folder in
an Arm Tool (or components thereof).
“Reports” means any written reports or other information relating to the
behavior, performance or configuration of Products, in html, binary, text or any
other format (excluding for the avoidance of doubt, Arm Tools Performance Data),
generated by you from or using Arm Tools and any modifications thereto.
“Secure” means, in relation to a computer, network or server (as applicable),
that it is (i) protected by strict firewall controls; (ii) all communications to
and from it are encrypted; (iii) you (or, only for the purposes of clause 3.4
(b) and as defined therein, Your Subsidiary) have control over access to and use
of the Arm Tools being run on it; and (iv) such access and use is not in
violation of the export compliance requirements set out in this License.
“Software” means software owned by you and/or licensed by you from a third
party, including, but not limited to, applications, libraries and Arm
API-compliant plug-ins, but excluding Arm Software and Software Models.
“Software Information File(s)” means Third Party Licenses Files,
Redistributables Files, and/or Supplementary Terms Files (as the context
requires).
“Software Models” means software that functionally models or implements, in
whole or in part, (i) an Arm Compliant Product; or (ii) an Arm IP block, in a
virtual (non-silicon) environment.
“Special Conditions” is as defined above in Recital (B) of this License.
“Specified Project” means a single design and development activity undertaken by
you or your Permitted Users relating to Products, the details of which (if
applicable) shall be set out in the order documentation provided to you by Arm.
“Supplementary Terms File” means a software file or folder typically named
‘supplementary_terms’ located within the ‘license_terms’ folder in an Arm Tool
(or components thereof) which (if applicable) details any component-specific
extensions, limitations or other variations to the terms of this License.
“Third Party Licenses File” means a software file or folder typically named
‘third_party_licenses’ located within the ‘license_terms’ folder in an Arm Tool
(or components thereof) which (if applicable) details any third party material
included in the relevant Arm Tool which is not licensed under the terms of this
License, and references the applicable third party license terms and conditions.
“Update” means an update, patch, hotfix, bug fix, support release, modification
or limited functional enhancement (as applicable) to an Arm Tool or component
thereof, including but not limited to error corrections to any program or
associated documentation developed by or for Arm comprised in the Arm Tools,
which (i) Arm makes generally available to the market, and (ii) does not, in
Arm's opinion, constitute an Upgrade or a new product.
“Upgrade” means a new release of an existing Arm Tool which Arm makes generally
available to the market and which usually contains major functional
improvements.

2. 	LICENSE GRANT
2.1 	Subject to your compliance with the terms and conditions of this License,
and payment by you of the Fees (if any), Arm hereby grants to you and, subject
to clause 3.4, your Permitted Users during the License Term a non-exclusive,
non-transferable license to receive and use the Arm Tools, certain components
thereof, or optional functionality, for the permitted uses set out in this
clause 2 and subject to the restrictions set out in clause 3 (as limited,
extended or otherwise varied by any terms, including product-specific permitted
uses and restrictions, set out in the Special Conditions). Except as expressly
permitted by this License, you and your Permitted Users shall NOT copy, modify,
sub-license, redistribute, make available, provide third parties access to, or
otherwise use any component of the Arm Tools.

2.2 PERMITTED USE OF THE ARM TOOLS: Except as otherwise provided in this
License, use of the Arm Tools (or components thereof) is permitted for the
purpose of:

(a) building, developing, testing, debugging, analysing (including generation of
Reports) and optimising Software and Ancillary Hardware;

(b) subject to you holding a current and valid license from Arm for the relevant
version of the Arm architecture, Arm technology or implementation (as
applicable) to which the Arm Tools are applied, building, developing, testing,
debugging, analysing (including generation of Reports) and optimising:
(i) Arm Compliant Products, provided that such license expressly grants the
right to manufacture or have manufactured those Arm Compliant Products;
(ii) Software Models, provided that such license expressly grants the right to
develop and distribute those Software Models;

(c) subject to clause 3.9, developing updates, enhancements, improvements to,
and/or derivatives or modifications of Arm Scripts (“Modified Code”) and use of
such Modified Code solely in accordance with the licenses for Arm Tools granted
in this clause 2.2; and

(d) only as expressly permitted in the relevant Redistributables File: (i)
incorporating, compiling and/or linking the Arm Tools or components thereof
identified as ‘redistributables’ in the Redistributables File into a software
Product, provided that the software Product contains substantial additional
functionality; and (ii) subject to clause 3.1 below, reproducing and
redistributing the files (and permitting your customers and/or your authorised
distributors to reproduce and redistribute the files), only in object code form
and, unless otherwise specified in the relevant Redistributables Files, only as
part of the software Product. Except as expressly provided to the contrary in
the relevant Supplementary Terms File, you may only copy the Arm Tools (or any
component thereof) to the extent that such copying is incidental to the
permitted uses set out in this clause 2.2, including installation, backup and
execution.

3.	YOUR OBLIGATIONS AND RESTRICTIONS ON USE
3.1	OBLIGATIONS RELATING TO REDISTRIBUTION: Any redistribution as permitted by
this License is subject to any restrictions set out in the applicable Special
Conditions, and your compliance with the following:
(a) 	in cases where you are expressly permitted under this License (including
for the avoidance of doubt by inclusion of agreed wording in the order
documentation provided to you by Arm) to sub-license or redistribute any Arm
Tool or component thereof to your customers, authorised distributors or other
third parties, you are responsible for ensuring that such customers, authorised
distributors and third parties accept, and are contractually bound (by agreement
with you or directly with Arm) to comply with, the terms and conditions of this
License;
(b) 	any use by you of Arm’s or any of its licensors’ names, logos or trademarks
to publicise or market any software Product containing (or developed or
generated using) Arm Tools is subject to you obtaining express written
permission from Arm;
(c)	you warrant that you shall not make any representations or warranties on
behalf of Arm in respect of any of the Arm Tools or in respect of any other
software, reports or documentation developed or generated by you in accordance
with the license grants set out in this License;
(d)	you must reproduce or preserve (as applicable) any copyright notices which
are included in or with any Arm Tools or components thereof; and
(e)	except as otherwise agreed by Arm (including for the avoidance of doubt by
inclusion of the relevant permission in a Supplementary Terms File), you may not
disclose or otherwise distribute any Arm Tools Performance Data. For the
avoidance of doubt, nothing in this sub-clause 3.1 (e) shall prevent you from
disclosing or otherwise distributing Reports.

3.2	NON-COMMERCIAL USE AND FREE OF CHARGE LICENSES: If you are in receipt of a
Non-Commercial Use License for the Arm Tools, or the Arm Tools or any component
thereof are identified or classified as such, and/or you are receiving the Arm
Tools free of charge, then notwithstanding any of the other terms and conditions
of this License, your use (which includes use by your Permitted Users) of the
Arm Tools is limited as follows:
(a)	if you are receiving the Arm Tools free of charge:
(i)	no support or maintenance shall be provided to you in respect of the Arm
Tools;
(ii)	the warranty set out in clause 8.1 of this License does not apply to you or
your use of the Arm Tools, and Arm gives no other warranty whatsoever in
relation to (and accepts no liability in connection with) the Arm Tools or your
use (as permitted by this License) of them;
(iii)	Arm may immediately terminate this License at any time for any reason by
giving written notice to you;
(iv)	except as otherwise expressly agreed in writing by Arm, you shall grant to
Arm in full the license set out in clause 4.2 of this License; and/or
(b)	if you are receiving a Non-Commercial Use License or version (as applicable)
of the Arm Tools:
(i) 	you and your Permitted Users may use the Arm Tools for internal use only;
and
(ii) 	you are not permitted to distribute or sub-license (A) any part of the Arm
Tools, or (B) Products or Reports developed under this License using the Arm
Tools. The Arm Tools shall be used only by you and your Permitted Users, and you
shall not (except as otherwise authorised in writing by Arm) allow any other
third party whatsoever to use the Arm Tools; and
(c)	for the avoidance of doubt, if you are receiving a Non-Commercial Use
License and the license is provided to you free of charge, the restrictions in
both sub-clauses (a) and (b) above will apply to your use of the Arm Tools.

3.3	RESTRICTIONS RELATING TO LICENSE TYPES: Depending on the type of license you
have purchased from Arm under this License (the details of which shall be set
out in the order documentation provided to you by Arm), your use of each
Licensed Seat of an Arm Tool shall be limited to:
(a) 	for a ‘Node Locked License’, use only (i) on one specified item of computer
hardware, and (ii) at any point in time, by one individual Permitted User for
one ‘process’. For the purpose of this sub-clause 3.3 (a), each ‘process’ is the
execution of an instance of an Arm Tool;
(b)	for a ‘Floating License’, use only by one individual Permitted User at a
time on specified items of computer hardware;
(c)	for an ‘Authorised User License’ (otherwise known as a ‘User-Based License’
or ‘UBL’), use only by (i) one individual assigned Permitted User, OR (ii) one
assigned Automation Process, provided always that only Permitted Users that have
a valid Authorised User License for an Arm Tool shall be permitted to deliver to
an Automation Process jobs generated using that Arm Tool. An Authorised User
License may not be shared by multiple Permitted Users. For the purposes of this
sub-clause 3.3 (c), “Automation Process” means a process or processes used to
automate certain software methods, such as continuous integration. Further
information relating to license management for Authorised User Licenses can be
obtained from your Arm (or supplier (if not Arm)) representative; or
(d)	in respect of a ‘Specified Project License’, use for a Specified Project.

3.4	PERMITTED USERS: Subject to the terms and conditions of this clause 3.4, the
Arm Tools may be used by the following users (“Permitted Users”):
(a)	Your employees, workers, consultants, professional advisors, bona fide
sub-contractors and service providers that use the Arm Tools only (i) in
connection with the provision of work carried out for your benefit; and (ii) on
Secure computers or Secure private networks (physical or virtual) that may or
may not be owned or controlled by you OR Secure computing resources leased by
you from third party cloud service providers; and
(b)	ONLY in cases where you have a current valid ‘Multi-entity License’, the
employees, workers, consultants, professional advisors, bona fide
sub-contractors and service providers of Your Subsidiary, provided the Arm Tools
are used by them only (i) in connection with the provision of work carried out
for your or Your Subsidiary’s benefit; and (ii) on Secure computers or Secure
private networks (physical or virtual) that may or may not be owned or
controlled by you or Your Subsidiary OR Secure computing resources leased by you
or Your Subsidiary from third party cloud service providers. For the purposes of
this clause 3.4 (b), “Your Subsidiary” means a company the majority of whose
voting shares is, as at the date of formation of the contract between you and us
in respect of the license of the Arm Tools, owned or controlled, directly or
indirectly, by you. A company shall be Your Subsidiary only for so long as such
control exists.

You hereby agree to be responsible for the acts and omissions of any and all
Permitted Users, and shall ensure that such Permitted Users (i) are
contractually obliged to comply with the terms of this License, including those
relating to confidentiality; and (ii) do not supply Arm Tools or any components
thereof to any third party whatsoever. Except as expressly provided in this
License or as agreed in writing by Arm on a case by case basis, you shall not
sub-license, redistribute, lease, rent or otherwise make available or allow any
third party to access or use the Arm Tools or License Keys. Any breach of this
License by a Permitted User shall entitle Arm to terminate this License in
accordance with the provisions of clause 12.2, and you agree to hold harmless
and indemnify Arm against all and any loss, liability, costs, damages, expenses
(including the reasonable fees of lawyers and other professionals) suffered, as
a result of or in connection with such breach. Any termination of this License
in accordance with the provisions of clause 12.2 shall be effective in respect
of you and all Permitted Users.

3.5	REVERSE ENGINEERING: Subject to Clause 2.2(c), your use of Arm Tools shall
specifically exclude the reverse engineering, decompiling, disassembly,
translation, adaptation, arrangement or other alteration of any part of the Arm
Tools (except to the extent that applicable law overrides this provision or any
part hereof).

3.6	OWNERSHIP AND INTELLECTUAL PROPERTY RIGHTS: The parties agree as follows:
(a)	Arm Tools. Arm Tools are owned by Arm and/or its licensors and are protected
by copyright and other intellectual property rights, laws and international
treaties. Arm Tools are licensed not sold. Except as expressly provided by this
License, you acquire no rights to any Arm Tools or elements thereof, or to any
other Arm products or services. You shall not remove from Arm Tools any
copyright notice or other notice and shall ensure that any such notice is
reproduced in any permitted reproduction of the whole or any part of the Arm
Tools.
(b)	Modified Code. Arm retains ownership of all Arm Scripts, and any elements of
Modified Code that are derived from, incorporate, or relate to Arm Confidential
Information or Arm Intellectual Property Rights. You shall retain ownership of
your independent modifications solely to the extent such modifications are
separable from and do not incorporate Arm Confidential Information or Arm
Intellectual Property Rights and only in their underlying structure or
framework, excluding any functional logic, data, or configurations relating to
Arm products or technology. Any Arm-owned elements within the Modified Code
shall be deemed part of the Arm Tools. You may only use any portion of the
Modified Code owned by you after removing all Arm-owned elements, unless
otherwise expressly permitted under this License or the applicable Supplementary
Terms File.

3.7	TECHNICAL RESTRICTIONS IN THE ARM TOOLS: You must comply with any technical
restrictions in Arm Tools and License Keys, including any restrictions that
restrict use to certain components of Arm Tools or use only for certain
purposes. You shall not work around any such technical restrictions.

3.8	ARM DOCUMENTATION: Use of Arm Documentation (if any) is permitted internally
only in conjunction with your use of the Arm Software to which it relates.

3.9	MODIFIED CODE: Notwithstanding any of the other terms and conditions of this
License, (i) unless expressly permitted in the applicable Supplementary Terms
File, you shall not disclose, distribute, share or otherwise make available any
Modified Code; (ii) no support or maintenance shall be provided to you in
respect of Modified Code; (iii) the warranty set out in clause 8.1 of this
License shall not apply to Modified Code; and (iv) Arm gives no other warranty
whatsoever in relation to (and accepts no liability in connection with) Modified
Code or your use of it as permitted by this License.

4. LICENSE TO ARM
4.1	Feedback. You may at your discretion deliver any suggestions, comments,
feedback, ideas, or know-how (whether in oral or written form) to Arm relating
to or connected with your use of Arm Tools (“Feedback”). Notwithstanding the
foregoing, you shall not knowingly give to Arm any Feedback that you are aware
(or should reasonably be aware) is subject to any patent, copyright or other
intellectual property claim or right of any third party.

4.2	Except as expressly notified by you to Arm (in writing which may include
email) to the contrary, you hereby grant to Arm under your and your affiliates
(as applicable) intellectual property rights, a perpetual, irrevocable, royalty
free, non-exclusive, worldwide license to: (i) use, copy, modify, and create
derivative works of the Feedback; (ii) sell, supply or otherwise distribute the
whole or any part of the Feedback (and derivative works thereof) as part of any
Arm owned or licensed product(s) without obligation or restriction of any kind;
and (iii) sub-license to third parties the foregoing rights, including the right
to sub-license to further third parties. No right is granted by you to Arm to
sub-license your and your affiliates (as applicable) intellectual property
rights except to the extent that it is provided to Arm as Feedback and is
embodied in any Arm owned or licensed product(s). For the avoidance of doubt,
if, during the License Term, you provide notice to Arm revoking the license
granted under this clause 4.2, you acknowledge and agree that such revocation
shall not apply to Feedback delivered to Arm prior to the date of receipt of the
revocation notice, and that (notwithstanding the foregoing) Arm shall continue
to be permitted to use Feedback received after the date of receipt of the
revocation notice for internal purposes.

4.3	Except as expressly licensed to Arm in clause 4.2, you retain all right,
title and interest in and to the Feedback provided by you under this License.

4.4	Modified Code. To the extent that you retain any ownership interest in any
Modified Code pursuant to the definition of Modified Code, you hereby grant to
Arm and its affiliates a perpetual, irrevocable, non-exclusive, royalty-free,
worldwide license, with the right to sublicense (through multiple tiers) to use,
reproduce, modify, create derivative works of, integrate, distribute, perform,
display, and otherwise exploit such Modified Code, in any form and for any
purpose, including as part of Arm products, tools, services, or documentation.
For the avoidance of doubt, this license applies only to the portions of
Modified Code owned by you and does not limit or replace Arm’s ownership of any
Arm-owned elements of the Modified Code.

5. DATA COLLECTION AND PRIVACY
5.1	Arm Software may include features that enable it to transmit certain
computer information over the internet to Arm’s computer systems. Any
non-anonymous data collected by Arm, for example your computer’s internet
protocol address, computer hardware and operating system details, or the serial
numbers of Arm Tools you have licensed, shall be used by Arm only for the
purpose of Arm protecting its legitimate interests, which may include Arm
verifying your right to use any Arm Tools and monitoring your compliance with
the permitted uses and restrictions set out in this License.

5.2	Arm may also collect anonymous data, which, for the avoidance of doubt,
cannot be used to identify individual users of Arm Tools. This information may
be used by Arm to help us understand and analyse what components or features in
Arm Tools our end users are using in order to (i) maintain and improve the
quality of the Arm Tools and the end user experience, (ii) inform end users of
relevant new and improved products and services, and (iii) assist end users to
maximise the performance of, or solve user experience issues with, the Arm
Tools.

5.3	Information collected by Arm Software will only be used for the
aforementioned purposes. Please refer to the Arm Privacy Policy
https://www.arm.com/company/policies/privacy for further information on how Arm
collects, uses and safeguards personal data (including but not limited to
personal data collected for the protection of Arm’s legitimate interests and
your rights to object to its collection).

6. SUPPORT AND MAINTENANCE
6.1	Provision of reasonable support and maintenance is subject to payment by you
of all applicable Fees.

6.2	Any support provided by Arm in accordance with the above clause 6.1 shall
(i) be provided by telephone, email or such other format as is designated by
Arm, (ii) be prioritised at Arm’s discretion, and (iii) not be used as a
substitute for training or as additional resource for your projects.

6.3	Maintenance will generally be provided in the form of Updates to Arm Tools.
Arm shall be under no obligation to provide such maintenance in respect of any
modifications made by you (where permitted) to Arm Tools. Updates do not
constitute additional Licensed Seats and may only be used by you if you have an
active Licensed Seat to run and use such Updates. Updates will generally be
provided to you as soon as reasonably practicable following the date of general
public release of the Update by Arm.

6.4	In cases where the Arm Tools were provided to you free of charge, you are
not entitled to any support or maintenance for the Arm Tools from Arm, but Arm
may, in its sole discretion, provide support to you. If you obtained the Arm
Tools from an Arm authorised distributor, reseller or other third party, support
and maintenance may be provided by either Arm or the third party as per the
terms of your contract for supply. Arm shall not be responsible for any delay or
failure in connection with any third party supplier providing support or
maintenance that it is obligated to provide to you. Please refer to the
‘Support’ area of https://www.arm.com for details of Arm’s support services,
relevant contact details, and (if applicable) details of other authorised
support channels.

6.5	Any obligation Arm has under this clause 6 is limited to the provision of
support and maintenance to you, and Arm is under no obligation to provide any
support and maintenance to any third parties. You agree to provide all front
line support services to all third parties to whom you distribute any Arm Tools,
Products or Reports, pursuant to and in accordance with the terms of this
License.

6.6	Archive Licenses are provided without any entitlement to support or
maintenance.

6.7	This License does not grant you any entitlement to receive (i) Upgrades,
(ii) Arm products other than those specified in your product documentation, or
(iii) any new products developed or introduced by Arm from time to time, nor to
receive any support or maintenance in respect of the same.

7. CONFIDENTIALITY
7.1 You acknowledge that the Arm Tools, License Keys, Arm Tools Performance
Data, and any and all other software, documentation or other information
licensed to you by Arm, or provided to you during discussions about or in
connection with the Arm Tools (including this License and information provided
during the provision by Arm of any support), contain trade secrets and
confidential information of Arm (“Confidential Information”).

7.2 You agree to maintain all such Confidential Information in confidence and
apply security measures (such measures to be no less stringent than the measures
which you apply (or should reasonably apply) to protect your own like
information, but not less than a reasonable degree of care) to prevent their
unauthorised disclosure and use.

7.3 Subject to any restrictions imposed by applicable law, the period of
confidentiality shall be indefinite. You agree that you shall not use any such
information other than in your normal use of the Arm Tools as permitted by this
License.

8 LIMITED WARRANTIES
8.1	For the period of ninety (90) days from the date of receipt by you of Arm
Tools, Arm warrants to you that; (i) Arm Software will perform substantially in
accordance with the accompanying Arm Documentation (if any); and (ii) Arm
Software will be compatible with the hardware and software mentioned as such in
the Arm Documentation. Arm's total liability and your exclusive remedy for
breach of these warranties shall be limited to Arm, at Arm's option (a)
replacing any defective Arm Software; or (b) using reasonable efforts to correct
material, documented, reproducible defects in the Arm Software and delivering
such corrected Arm Software to you; or (c) if you licensed the Arm Software
directly from Arm, refunding the price paid by you to Arm for that Arm Software.
Any replacement Arm Software will be warranted for the remainder of the original
warranty period or thirty (30) days from the date of replacement, whichever is
longer.

8.2	Arm Software described in any Arm Documentation is subject to continuous
development and improvement. All particulars of Arm Software and its use as
described in the applicable Arm Documentation are given by Arm in good faith.
Consequently, the information contained in Arm Documentation is subject to
change without notice and is not warranted to be error free. If you discover any
errors in Arm Documentation please report them to Arm in writing. Any Arm
Documentation provided to you that relates to specific industry quality and
functional safety standard compliance may assist you in applying to a competent
auditor for certification of Products, but you acknowledge and agree that on its
own such Arm Documentation may not provide sufficient evidence of, or be
compatible with, the required safety compliance standards.

8.3	Except as provided in clause 8.1 above, you agree that Arm Tools, and any
associated support and maintenance, are licensed or provided (as applicable) “as
is”, and that Arm and its licensors expressly disclaim all representations,
warranties, conditions or other terms, express or implied or statutory,
including, without limitation, the implied warranties of merchantability,
non-infringement, satisfactory quality, and fitness for a particular purpose.
You acknowledge that it is your responsibility to satisfy yourself that any Arm
Tools are fit for the intended purpose and satisfy your requirements, including
compatibility with Products, and you expressly assume all liabilities and risks
relating to (i) any use of an Arm Tool which is inconsistent with its design or
any guidance provided to you in the applicable Arm Documentation, and/or (ii)
any use of an Arm Tool with Products where such software or hardware (as
applicable) is not supported by or compatible with the relevant Arm Tool.

8.4	You expressly assume all liabilities and risks relating to your use or
operation of Products designed or modified using Arm Tools, including without
limitation, Products designed or intended for safety-critical applications.
Should any Product prove defective, you assume the entire cost of all necessary
servicing, repair or correction.

9 LIMITATION OF LIABILITY
9.1	To the maximum extent permitted by applicable law, in no event shall Arm be
liable for any indirect, special, incidental or consequential damages (including
loss of profits) arising out of the use of, or inability to use, Arm Tools,
whether based on a claim under contract, tort or otherwise, even if Arm was
advised of the possibility of such damages.

9.2	Arm does not seek to limit or exclude liability for death or personal injury
arising from Arm's negligence or Arm’s fraud. Arm acknowledges that certain
jurisdictions do not permit the exclusion or limitation of liability for
consequential or incidental damages, and in such cases the above limitation
relating to liability for consequential damages may not apply to you.

9.3	Notwithstanding anything to the contrary contained in this License, the
maximum liability of Arm to you in aggregate (in contract, tort or otherwise) in
relation to or in connection with the subject matter of this License shall not
exceed the greater of (i) the total sums paid by you to Arm (if any) for this
License, and (ii) $10.00 USD. The existence of more than one claim or suit will
not enlarge or extend the limit. You release Arm from all obligations,
liability, claims or demands in excess of this limitation.

10 THIRD PARTY MATERIAL
10.1	Arm Tools may contain material owned or developed by third parties,
including but not limited to open source software, freeware and commercial
software (“Third Party Material”). Details relating to such Third Party Material
shall be detailed in the Third Party Licenses File(s). Your use of such Third
Party Material is subject to your compliance with the applicable Third Party
Material license(s).

10.2	Arm hereby disclaims any and all warranties express or implied from any
third parties regarding, or otherwise connected with, any Third Party Material
included in Arm Tools and any Third Party Material from which any Arm Tools are
derived, and/or your use of any or all of the Third Party Material in connection
with Products, including (without limitation) any warranties of satisfactory
quality or fitness for a particular purpose.

10.3	No Third Party Material licensors shall have any liability for any direct,
indirect, incidental, special, exemplary, or consequential damages (including
without limitation lost profits) howsoever caused and whether made under
contract, tort or otherwise arising in any way out of your use or distribution
of the Third Party Material or the exercise of any rights granted under this
License, even if advised in advance of the possibility of such damages.

11. 	GOVERNMENT REQUIREMENTS
11.1	To the extent that you are an agency, contractor or instrumentality of the
U.S. Government, you and we agree that:
(a)	Arm Tools are commercial computer software and commercial computer software
documentation, and that your rights therein are as specified in this License,
per FAR 12.212 and DFARS 227.7202-3, as applicable, or in the case of NASA,
subject to NSF 1852.22786. Arm acknowledges that, whilst commercial computer
software or commercial computer software documentation shall be acquired under
licenses customarily provided to the public, such licenses must be consistent
with U.S. Federal law and otherwise satisfy the U.S. Government's needs (“U.S.
Government Requirements”); and
(b)	you may assign your rights under this License to the relevant US Government
Federal Department or the successor contractor designated by the US Government
Federal Department upon termination of your related prime contract with that US
Government Federal Department. If you exercise your rights under this clause
11.1(b), you acknowledge and agree that you shall remain liable to Arm in
respect of all your obligations under this License.

11.2	If there is any material inconsistency between (i) either a U.S. Government
Requirement or a requirement of another government with which Arm is mandated by
statute to comply and (ii) any provision of this License, the terms of the
relevant government requirement shall prevail and the provision in question
shall be deemed varied or deleted (as applicable) as required by the terms of
the relevant government requirement. For the avoidance of doubt, in such
circumstances, all other terms, conditions and provisions of this License will
continue to be valid to the fullest extent permitted by law in accordance with
the below clause 13.3.

12. 	TERM AND TERMINATION
12.1	Subject to clauses 12.2 and 12.3 below, this License shall remain in force
until terminated by you, by Arm or (in the case of a time limited license) by
expiry.

12.2	In the event of a party breaching of any of the terms and conditions of
this License, which if capable of remedy, has not been remedied by that party
within thirty (30) days of the date of breach, without prejudice to any of its
other rights under this License, the non-breaching party may terminate this
License immediately upon giving written notice to the breaching party. Upon
termination of this License by you or by Arm, or upon expiry, you shall (and
shall ensure that your Permitted Users shall) immediately (i) stop using the
relevant Arm Tools, Modified Code (or any element thereof) and any Confidential
Information and, (ii) destroy all copies of the same in your possession or
control, together with all Arm Documentation and related materials.

12.3	Notwithstanding the foregoing, except where Arm has terminated this License
for your breach, your rights (if applicable) to distribute any Products
developed using the Arm Tools prior to termination or expiry of this License
shall (subject to your continued compliance with the terms and conditions of
this License) survive such termination or expiry.

12.4	Without limitation to the survival of other terms as expressly set out
elsewhere in this License, upon termination or expiry of this License, the
provisions of clauses 1, 3.1, 3.5, 4.2 and 4.4, 7, 8, 9, 10, 12 and 13 shall
survive.

13.	GENERAL
13.1	This License is governed by English Law. Notwithstanding the foregoing, to
the extent that you are an agency, contractor or instrumentality of the U.S.
Government, disputes arising under or relating to this License shall be decided
under the U.S. federal law of government contracting, including without
limitation the Contract Disputes Act. Nothing in this License shall prevent you
from enforcing your intellectual property rights or seeking injunctive or other
equitable relief in any court of competent jurisdiction. The parties hereby
disclaim application of the United Nations Convention on Contracts for the
International Sale of Goods and the Uniform Computer Information Transactions
Act.

13.2	Except where Arm agrees otherwise in (i) a written contract signed by you
and Arm, or (ii) a written contract provided by Arm and accepted by you, this
License (including any documents expressly incorporated herein) is the only
agreement between you and Arm relating to the Arm Tools and it may only be
modified by written agreement between you and Arm. No terms and conditions
contained in any purchase order or other document issued by you, or any
advertising or other representation by you or any third party shall add to,
supersede or in any way vary the terms and conditions of this License. This
License (and any documents expressly incorporated into it by reference herein)
represents the entire agreement between you and Arm in relation to its subject
matter.

13.3	If any clause or sentence in this License is held by a court of law to be
illegal or unenforceable, the remaining provisions of this License shall not be
affected. Any failure by Arm to enforce any of the provisions of this License,
unless waived in writing, shall not constitute a waiver of Arm's rights to
enforce such provision or any other provision of this License in the future.

13.4	Subject to clause 11.1(b), neither this License or any rights granted to
you under it may be assigned, sub-licensed or otherwise transferred by you to
any third party without the prior written consent of Arm. An assignment shall be
deemed to include, without limitation (i) any transaction or series of
transactions whereby a third party acquires, directly or indirectly, the power
to control the management and policies of you, whether through the acquisition
of voting securities, by contract or otherwise; and (ii) the sale of more than
fifty percent (50%) of your assets whether in a single transaction or series of
transactions. Notwithstanding the foregoing, Arm may, in its discretion acting
reasonably, separately agree to authorise the re-host of a Licensed Seat (for
which additional charges may apply).

13.5	Subject to any applicable legal restrictions, including but not limited to
those relating to the security of classified information, at Arm’s reasonable
request, (i) you agree to check your computers for installations of the Arm
Tools, copies of License Keys, contents of any license server log files,
individual or concurrent usage of Licensed Seats, and any other information
requested by Arm relating to Arm Tools installation, usage and License Key
management, and, to provide this information to Arm; and (ii) you agree that Arm
may instruct appropriately qualified independent auditors to perform such checks
by prior appointment during your normal business hours on reasonable notice. In
respect of any audit, Arm shall bear the auditors’ costs for that audit unless
it reveals unlicensed usage, in which case you shall promptly reimburse Arm for
all reasonable costs and expenses, including professional fees, relating to such
audit. Any information which is disclosed to Arm or such auditors during
checking or audit shall be treated as your confidential information and shall
only be used by Arm for compliance and enforcement purposes.

13.6	Arm Confidential Information, Arm Tools and any other Arm products provided
under this License may be subject to U.K., European Union, and U.S. export
control and sanctions laws and regulations, including the U.S. Export
Administration Regulations (“EAR”) (hereafter collectively referred to as
“Export Regulations”). The parties agree to comply fully with all applicable
Export Regulations. You agree that you shall not, either directly or indirectly,
export in breach of the Export Regulations any Arm Confidential Information, Arm
Tools or other Arm products received under this License, nor any direct products
thereof: (i) to any country, company or person subject to export restrictions or
sanctions under the applicable Export Regulations without required export
authorisation; or (ii) for any prohibited end use, which at the time of export
requires an export license or other governmental approval, without first
obtaining such license or approval. The specific export controls applicable to
any Arm Confidential Information, Arm Tools or other Arm products is determined
by the relevant ECCN. Arm will provide ECCNs for licensed products upon request
to tradecompliance@arm.com. You are responsible for determining the jurisdiction
and classification of the designs you create using Arm Confidential Information,
Arm Tools or other Arm products. Arm Confidential Information, Arm Tools or
other Arm products provided under this Licensee are dual-use, and are not listed
on the UK Military List, nor are they subject to the International Traffic in
Arms Regulations (ITAR), the 600 Series of the EAR or other military export
control regimes. The parties are prohibited from sharing ITAR-controlled
technical data, 600 series-controlled technology, other export controlled
military data, or any other data that might require an export license or other
export authorisation without prior written consent from the other
party. Further, Arm is expressly authorised to use non-U.S. citizens for the
performance of this License with the exception of nationals of Country Group E:1
and E:2 as listed in Supp. 1 to Part 740 of the EAR, which shall only be
permitted in full compliance with all applicable laws.

13.7	All notices which are required to be given hereunder must be in English and
in writing and must be delivered: (i) personally to the other party’s employee
with the authority to accept such delivery (in which case it will be deemed
served immediately), (ii) by first class post (in which case it will be deemed
served on the third business day after it was posted) to the Notice Address (as
defined below), or (iii) by registered commercial courier (in which case it will
be deemed served on the second business day after deposit with the courier) to
the Notice Address (as defined below). This clause shall not apply to the
service of any proceedings or other documents in a legal action. The “Notice
Address” for the purposes of sub-clauses (ii) and (iii) above means 120 Rose
Orchard Way, San Jose, CA 95134, Attention: General Counsel. To be effective,
any notice delivered pursuant to sub-clauses (i), (ii), or (iii) of this clause
13.7 must also be emailed to litigation@arm.com no later than twenty-four (24)
hours after the notice is deemed served.

Notice Address for Arm

General Counsel
120 Rose Orchard Way
San Jose
CA 95134

Notice Address for Licensee

Licensee’s address set out in the order documentation, or such other Notice
Address as Licensee provides to Arm in writing from time to time.


Arm Document Reference LES-PRE-21260, Version 12.6, Effective 21 May 2026



CONFIDENTIAL




1 of 1
